Luca Terzago
Robotic system suitable for carbon fiber components for sportswear, components for motorcycles, cars, airplanes and boats. Special electro spindles with rotation up to 40000 rpm and pressurized are used for this specific application. These robotic systems are equipped with appropriate protective cabins
Robot4industry can be used for resin models for footwear, small molds, components for motorcycles, cars, airplanes and boats, or models for foundries in general. Electro spindle power 12 kW
Our robotic system can be applied for bathroom or kitchen countertops and architectural cladding in general. Electro spindle 12 kW
Can be used for models and molds in the motorcycle, automobile, truck, train, airplane, and sail or motor boat industries. Electrospindle power 8 kW.
Our robot can be used for cutting sprues and perform general deburring in ferrous and nonferrous metal foundries. Robot4industry, equipped with appropriate tools, can also be used for sanding or polishing.
Can be used for cutting all materials We have solutions with systems on fixed base or with robots installed on portals with dimensions up to 48x16 ft Used pumps with pressure up to 90000 PSI/6200 bar made in collaboration of KMT
The robotic system can be applied for making molds or models for all applications where processing with low or medium density foams or resin-coated models is involved. These plants can also be used for sanding models and molds if equipped with the provided sanding KIT. Dimensions up to 60x9x14(h) ft
Robot4industry be used for making molds or models for all applications where precision machining and with low to medium density foams or resin-coated models are involved. These systems can also be used for sanding models and molds when equipped with the provided sanding KIT. Dimensions up to 30x8x10(h) ft.
Our robotic plant can be used for making large molds or models for all applications where processing with low or medium density foams or resin-coated models is involved. These systems can also be used for sanding models and molds when equipped with the provided sanding KIT. Dimensions up to 133x33x17(h) ft.
This system can be used in any joinery workshop due to its compactness and particularly favorable ratio of work area to required installation space. It comes complete with a protective enclosure that does not require floor fastening. Maximum power of the electrospindle 2 kW.
Robotic application useful in any joinery workshop due to its compactness and particularly favorable ratio of work area to required installation space. Maximum power of the electro spindle 12 kW
Our robot can be used in any joinery workshop due to its compactness and particularly favorable ratio of work area to required installation space. Maximum power of the electro spindle 12 kW. To increase the working range in the photo you can see a robot equipped with a motorized and interpolated linear guide.
This application can be used in any joinery workshop due to its compactness and particularly favorable ratio of work area to required installation space. Maximum power of the electro spindle 12 kW. To increase the working range in the photo you can see a robot equipped with a motorized, interpolated linear guide (33 ft) and fitted with a vacuum suction table.
Robotic plant made for the cutting and milling of architectural or construction components in reinforced concrete. The photo shows machining with an 18-kW electron spindle and equipped with an automatic head changer and cutting motor with a 25,5 inch disk. The robot is installed on a gantry with dimensions of 133x33x10(h) ft.
Robotized system for milling and grinding of architectural components (stairs) in reinforced concrete. Sanding is performed with an electro-plated diamond tool.
Example of our orbital head sanding of a solid surface furniture element installed on a medium size robot. This technology is also applicable for other materials (fiberglass, carbon, abs, wood and similar components)
Example of sanding bathroom furniture element, this technology is also applicable for other materials (fiberglass, carbon, abs, wood and similar components)
Sanding and polishing the inside of bathtubs or sinks is no problem thanks to the use of our robots and appropriate purpose-built equipment.
Example of marble architectural element roughing with robot equipped with automatic rotary table with 33000 lbs capacity, electro spindle 18 kW. Maximum machining dimensions 110x60x90(h) in.
Example of semi-finishing an artistic marble element with one of our robots equipped with an electro spindle with 22 kW power. Maximum workable dimensions 118x75x120(h) in.
Example of milling to finish an artistic marble element with a Robot4stone.
Cutting bathroom or kitchen countertops of natural or synthetic stone is easily done with one of our robots. The photo shows a system equipped with a motorized linear guide that allows maximum cutting dimensions of 150x80 in.
Cutting of bathroom or kitchen countertops of natural or synthetic stone is done with a combination head equipped with a disc motor and waterjet cutting head with 4200-bar abrasive. The photo shows a system mounted on a fixed metal base that allows maximum cutting dimensions: 115x78 in.
Our robotic cutting systems can perform vertical and inclined cuts up to 47° automatically and with simple and fast programming. With our SW you can also import cad drawings (DWG or DXF) or take photographs of the sheets of material to be cut to perform vein matching with ease.
Thanks to the use of specific electric motors and the possibility of having no limits on tool positioning, the Root4stone can perform all shaping operations with the disc, even on particularly hard material such as granite.
The use of disc shaping can also be used for roughing architectural elements instead of the more expensive grinding wheels. All with one positioning of the workpiece.
Performing diamond wire shaping without shape limitations is possible with Robot4stone, which also performs 5-axis cutting with a useful length of up to 125 in.
Our robots can replace traditional Cartesian systems because of their ability to perform cutter cuts or edge polishing and all the machining required to make bathroom or kitchen countertops. The machining macros set up in our SW make it easy and efficient to program the system
Robot4stone can accurately perform 5-axis interpolated machinin allowing you to have no limits in the production of any architectural element and place no limitations on your imagination.
Our robotic natural stone systems perform accurate finishes with all types of tools.
Robot4stone makes even complex machining simple. Using customized operating heads.
Our system can use polishing pads to perform all. Rib polishing and beveling processes on all natural and synthetic materials.
If you need to reinforce your natural stone slabs, Robot4Stone allow you to place reinforcing mesh (where provided) and spread resin or mastic in a fully automated manner.
Robotic palletizing system for marble and ceramic tiles with gripping device equipped with vacuum cups, with maximum size 35"1/2x24" and maximum weight of 120 lbs.
Automatic system for loading and unloading mechanical components automotive sector complete with double pneumatic gripper with maximum part weight of 30 lbs.
Automatic loading and unloading system for slabs and semi-finished products in natural stone, synthetic stone, and ceramics with a maximum load capacity of 990 lbs. The system can be equipped with a motorized linear guide up to 100 ft and a maximum load capacity up to 1800 lbs.
